TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 457 of 508

TM 9--2520--215--34

0081 00--1

OIL PRESSURE READINGS AND FUNCTIONAL TEST (TRANSMISSION

INSTALLED IN VEHICLE)

0081 00

THIS WORK PACKAGE COVERS:

Oil Pressure Readings, Functional Test

INITIAL SETUP:

Tools and Special Tools

General mechanic’s tool kit (item 1, WP 0088 00)

Gage, pressure indicating 0--60 psi (2)

(item 38, WP 0088 00)

Gage, pressure indicating 0--200 psi (2)

(item 40, WP 0088 00)

Gage, pressure indicating 0--400 psi (2)

(item 41, WP 0088 00)

Gage, pressure indicating 0--160 psi (2)

(item 39, WP 0088 00)

Torque wrench (item 22, WP 0088 00)

Materials/Parts

Lockwasher (6) (item 100, WP 0087 00)

Equipment Conditions

Vehicle parked and blocked

(TM 9--2350--256--10)

OIL PRESSURE READINGS

NOTE

Data sample test log sheet is illustrated in this work package.

Use the oil pressures listed in the data test log sheets as normal values when testing the

transmissions.

All necessary oil pressure tests can be made concurrent with functional test outlined in

functional test and test data log.

1. Remove six screws (1) and six lockwashers (2). Discard lockwashers.

2. Remove saddle cap assembly (3) and retainer (4).

3. Disengage coupling (5) by sliding toward output reduction gear assembly.

4. Reinstall cap assembly (3) with six screws (1) and six new lockwashers (2). Torque screws (1) to 67 to 80 lb--ft

(90.9 to 108.5 N

S

m). Do not install retainer (4).

1

2

3

4

5