TM-9-2520-238-34

M113A1 FOV, M113A2 FOV, M548 AND M548A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL; RIGHT ANGLE DRIVE, COOLING FAN; GEARCASE, TRANSFER; DRIVE ASSEMBLY, FINAL; DIFFERENTIAL, STEERING CONTROL; BRAKE, SINGLE DISK; CYLINDER ASSEMBLY, HYDRAULIC BRAKE

TM-9-2520-238-34

  TM-9-2520-238-34 - Page 170 of 319

TM 9-2520-238-34
REPAIR FINAL DRIVE ASSEMBLIES A AND B — Continued
0020 00
15. If needed, remove protective plug (14) and speedometer adapter (15) from final drive shaft (16).
16. Remove two pipe plugs (17) from housing (6).
CLEANING
CLEAN, INSPECT, AND REPAIR
1.
Before inspection, repair, or assembly of final drive assemblies, clean all parts as described in General Maintenance
section of (WP 0014 00).
2.
Inspect all parts. See (WP 0014 00) for general inspection and repair procedures. To measure parts for wear, see final
drive assemblies wear limits (page 0020 00-14). Repair or replace defective parts.
0020 00-6


Back to Top