TM-9-2520-238-34
M113A1 FOV, M113A2 FOV, M548 AND M548A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL; RIGHT ANGLE DRIVE, COOLING FAN; GEARCASE, TRANSFER; DRIVE ASSEMBLY, FINAL; DIFFERENTIAL, STEERING CONTROL; BRAKE, SINGLE DISK; CYLINDER ASSEMBLY, HYDRAULIC BRAKE
TM-9-2520-238-34 - Page 46 of 319
TM 9-2520-238-34
FINAL DRIVE HAS WATER INSIDE
0013 00
INITIAL SETUP:
Maintenance Level
Direct/General Support
Tools and Special Tools
General mechanic’s tool kit (WP 0033 00, Item 37)
Personnel Required
Track Vehicle Repairer
References
See your -20
Equipment Condition
Final drive removed from carrier (See your -20)
Disassemble for inspection per repair final drive
assemblies A, B (WP 0020 00)
T
1.
Inspect output shaft oil seal for damage.
2.
Are oil seals undamaged?
YES
NO
TN
1.
Replace damaged output shaft oil
seal (WP 0020 00).
2.
Verify no faults found.
Y
1.
Inspect cover and housing for damage.
2.
Are cover and housing undamaged?
YES
NO
YN
1.
Replace damaged cover and/or
housing if required (WP 0020 00).
2.
Verify no faults found.
2Y
1.
Inspect oil fill tube and nut for proper fit.
2.
Is nut on oil tube undamaged?
YES
NO
2YN
1.
Tighten oil fill tube nut (See your
-20).
2.
Verify no faults found.
3Y
1.
Tighten cover and housing screws.
2.
Verify no faults found.
0013 00-1/2 blank
Back to Top
