TM-9-2520-246-34-1

TRANSMISSION MODEL 3053A; TRANSMISSION TRANSFERS MODEL T-136-21 AND MODEL T-136-27; POWER TAKEOFFS MODEL WN-7-28, MODEL WND-7-28 AND MODEL P-136-C

TECHNICAL MANUAL; MAINTENANCE, DIRECT SUPPORT AND GENERAL SUPPORT LEVEL

JANUARY 1981

TM-9-2520-246-34-1 - Page 277 of 418

TM 9-2520-246-34-1

2-22. FINAL ASSEMBLY. The following paragraphs give instructions to assemble

the transmission transfer subassemblies into a final assembly.

NOTE

Keep all parts clean and protected from dust and dirt.

Coat all oil seals and all gears and shafts with engine

lubricating oil during assembly. Use new snaprings

and gaskets during assembly.

a.

Input Shaft Assembly.

FRAME 1

I

1.

Put shifter fork (1) on synchronizer sleeve (2).

2.

Put input shaft assembly (3) in transfer case (4) so that bearing (5) goes into

bearing bore (6).

END OF TASK

2-257