TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 159 of 933

TM 92520-270-34

1. Assemble transmission. See

task CLEAN MAIN HOUSING

ASSEMBLY, page 4-155,

1. ARE ANY CORRECTIVE ACTIONS REQUIRED ON

Corrective action:

1.

2.

REPLACE CONTROLLER ASSEMBLY

RECORD CONTROLLER ASSEMBLY

FAILURE ON DA FORM 2407 AND

RETURN WITH CONTROLLER

TO DEPOT.

1. PERFORM CORRECTIVE ACTIONS RECORDED ON

DA FORM 2404.

2. WAS MAIN HOUSING ASSEMBLY CLEANED?

END OF TREE

1.

2.

3,

4,

5.

6,

7.

8.

9.

10

Install left-hand hydraulic assembly, See task REPLACE

LEFT-HAND HYDRAULIC ASSEMBLY, page 4-360.

Install right-hand hydraulic assembly, See task REPLACE

RIGHT-HAND HYDRAULIC ASSEMBLY, page 4-378.

Install first range relay valve assembly, See task REPLACE

FIRST RANGE RELAY VALVE ASSEMBLY, page 4-418.

Install second range relay valve assembly, See task REPLACE

SECOND RANGE RELAY VALVE ASSEMBLY, page 4-5I4,

Install hose assemblies 11629168-7 and 11629168-10. See task

REPLACE HOSES AND PLUGS, page 4-2.

Install third range relay valve assembly. See task REPLACE

THIRD RANGE RELAY VALVE ASSEMBLY, page 4-502.

Install power takeoff assembly. See task REPLACE POWER

TAKEOFF ASSEMBLY, page 4-140.

Install disconnect clutch assembly, See task REPLACE

DISCONNECT CLUTCH ASSEMBLY, page 4-78.

Install disconnect clutch. See task REPLACE DISCONNECT

CLUTCH, page 4-52.

Assemble transmission, See task INSPECT TRANSMISSION

FOR CONTAMINATION, page 4-67,

Change 1

2-95

DA FORM 2404?