TM-9-2520-270-34
HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY
TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE
NOVEMBER 1984
TM-9-2520-270-34 - Page 31 of 933
TM 9-2520-270-34
MAINTENANCE TASKS
Below is a task that could have been referenced from an inspection tree or directly from a systems
Legend to Example Above
This is the name of the task,
This describes the overall actions you will perform (remove, disassemble,
adjust, assemble, install, etc.), It also gives the page where each action
begins. The
[DESCRIPTION
is left out when it would repeat the action
in the task title.
These are the tools and equipment you will need to complete the task.
Part number and national stock number of each tool can be found in
Appendix C. Tools found in the general mechanic’s tool kit are not listed
separately.
These are the supplies and parts you will need to do the task. The only
parts listed are those you must replace every time the task is performed,
such as the spring washers. Use the Repair Parts and Special Tools List
(RPSTL) to order the parts you need for the task.
Change 1
xiii
manual
.
Back to Top
