TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

  TM-9-2520-270-34 - Page 915 of 933

Subject, Page
R (cont)
Subject, Page
S (cont)
Repair, Inserts, 4-195
Repair Right-Hand Single Disk
Brake, 4-202
Replace, 4-170
Replace Friction Clutch, 4-208
Replace Right-Hand Single Disk
Brake, 4-197
Right-Hand Intermediate Housing Assembly
(Intermediate General Support
Maintenance instructions), 4-169
Right-Hand Output Carrier Assembly:
Repair, 4-304
Replace, 4-294
Right-Hand Output Housing:
Repair, 4-279
Repair, Inserts, 4-308
Repair Right-Hand Brake Actuating
Plate Inserts, 4-310
Repair Right-Hand Output Carrier
Assembly, 4-304
Repair Right-Hand Retainer Plate
Assembly Insert, 4-312
Replace, 4-270
Replace Right-Hand Output Carrier
Assembly, 4-294
Right-Hand Output Housing (Intermediate
General Support Maintenance
Instructions), 4-269
Right-Hand Retainer Plate Assembly,
Repair, Insert, 4-312
Right-Hand Single Disk Brake:
Repair, 4-202
Replace, 4-197
S
Scope:
(General Information), 1-1
(General Maintenance Instructions),
Seal, Encased, Replace, 3-2
Seals, Encased, Repair, 3-44
Seals, Shaft, Input Bevel Assembly,
Replace, 4-122
Second Range Brake Assemblies:
Repair Second Range Single Disk
Brakes, 4-441
Replace, 4-432
Second Range Brake Assemblies
(Intermediate General Support
Maintenance Instructions), 4-431
2-2
Second Range Relay Valve:
Repair, 4-521
Replace, 4-514
Second Range Relay Valve Assembly
(Intermediate General Support
Maintenance Instructions), 4-513
Service Brake Failure (Inspection Tree), 2-25
Service Upon Receipt:
Equipment Check, 2-1
Inspection, 2-1
Preparing the Transmission for
Maintenance, 2-1
Service Upon Receipt
(General Maintenance Procedures), 2-1
Shaft:
Clean, 2-5
Inspect, 2-7
Repair, 2-11
Shaft Assembly:
Cross, Repair, 4-464
Cross, Replace, 4-458
Shaft Seals, Input Bevel Assembly:
Replace, 4-122
Shims:
Inspect, 2-6
Repair, 2-9
Shipment, Preparation for Storage or, 1-1
Shipping/Storage Container:
Characteristics, Capabilities and
Features, 1-4
Repair, 4-526
Single Disk Brake:
Left-Hand, Repair, 4-262
Left-Hand, Repair, Housing Inserts, 4-268
Left-Hand, Replace, 4-255
Right-Hand, Repair, 4-202
Right-Hand, Replace, 4-197
Snap Rings:
Inspect, 2-6
Repair, 2-10
Special Tasks:
Replace Helical Coil Inserts, 2-166
Replace Inserts, 2-171
Special Tasks
(General Maintenance Procedures), 2-165
Special Tools and Support Equipment, 2-1
Spindle:
Clean, 2-5
Inspect, 2-7
Repair, 2-11
Index 10
Change 2
TM 9-2520-270-34


Back to Top