TM-9-2520-272-34P
CROSS DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4 & 4A
TECHNICAL MANUAL; INTERMEDIATE, DIRECT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
TM-9-2520-272-34P - Page 129 of 488
TM 9-2520-272-34&P
4-15
INSTALL OIL FILL TUBE ASSEMBLY
(SHEET 11 OF 11)
13 Using a 9/16 socket, extension and torque
wrench, install bolt (5) and washer (6) that retain
the bracket (7) to the LH End Cover Assembly
(8).
Torque bolt to 27 32 lb ft (36 43 Nm).
14 Using a 1-1/16 wrench to hold elbow (11) and 1-
1/4 crowfoot and toque wrench, torque nut (17)
on elbow (11) to 79 87 lb ft (107 -118 Nm).
15 Using a 5/16 wrench hold bolt (9) that retains
clamp (3) to bracket (7).
16 Using a 3/8 in socket and torque wrench, torque
nut (10) that retains the clamp (3) to the bracket
(7) to 10 15 lb ft (15 23 Nm).
17 Install oil level indicator (1) (dipstick) in oil tube
(2).
18 Turn oil level indicator (1) (dipstick), clockwise, in
oil tube (2) until tight.
4-63.3 Change 2
Para.
4-15, Task 4
Back to Top
