TM-9-2520-272-34P

CROSS DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4 & 4A

TECHNICAL MANUAL; INTERMEDIATE, DIRECT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

TM-9-2520-272-34P - Page 324 of 488

TM 9-2520-272- 34&P

5-3. BRAKE ADJUSTMENT

1

2

3

4

5

6

7

8

9

(SHEET 3

OF

5 )

Using 1/2 inch socket, remove four bolts (1) and

washers (2) retaining LH brake adjusting cover (3).

Remove cover (3) and gasket (4).

Remove governor assembly (5), turning clockwise to

disengage gear teeth.

NOTE

Combination wrench turned to right

(counterclockwise rotation of adjusting

link) tightens brake.

Combination wrench turned to left (clock-

wise rotation of adjusting link) loosens

brake.

Using 11/16 inch 60° angle-head wrench, turn brake

adjusting link (6).

Alternately turn adjusting link (6) with angle-head

wrench and apply torque wrench at 40 lb-ft (54 N•m)

on shaft until indicator lines up opposite APPLY mark.

Install governor assembly (5), engaging gear counter-

clockwise.

Install cover (3) with new gasket (4).

Using 1/2 inch socket, install four bolts (1) and

washers (2) retaining cover.

Using torque wrench, tighten four bolts (1) to 17-20

lb-ft (23-27 N•m).

End of Task 2

Go to Sheet 4

5-6 Change 1

Para. 5-3, Task 2