TM-9-2520-272-34P
CROSS DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4 & 4A
TECHNICAL MANUAL; INTERMEDIATE, DIRECT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
TM-9-2520-272-34P - Page 91 of 488
TM 9-2520-272-34&P
4-8.
REMOVE LEFT END COVER ASSEMBLY (SHEET 4 OF 10)
SUPPLIES:
Bolt, 3/8-16 x 2 inch (2 required)
Rag, wiping (Item 15, Appendix C)
Washer, flat, 3/8 inch (2 required)
WARNING
•
Check slings and lifting devices for cuts, breaks, or wear before and during hoisting.
Slings and lifting
devices can break and cause injury or death.
•
Left end cover assembly must be lifted using sling and hoist.
To avoid injury, keep clear of end cover at all
times.
Do not let left end cover assembly swing freely during hoisting.
Go to Sheet 5
Change 2
4-28.2
Para.
4-8 Task 3
Back to Top
