TM-9-2610-200-14

CARE, MAINTENANCE, REPAIR, AND INSPECTION OF PNEUMATIC TIRES AND INNER TUBES

TECHNICAL MANUAL; OPERATOR'S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT; MAINTENANCE MANUAL

SEPTEMBER 2000

TM-9-2610-200-14 - Page 127 of 207

TM 9-2610-200-14

2-86

CHAPTER 2. CARE, MAINTENANCE, AND INSPECTION (Con't)

SECTION V.

GENERAL SUPPORT MAINTENANCE (Con't)

2-40.

TIRE REPAIR PROCEDURES, SELF-VULCANIZING SPOT REPAIR (Con't).

7.

Apply mixed A and B tire repair filler by spreading

over prepared area (1 ) in thin layers, stitching each

layer thoroughly with stitcher, and building damaged

area up to just above surface of tire.

8.

Self-vulcanization will be complete in approximately

20 hours at room temperature, 70°F (21°C). The time

required for vulcanization can be reduced by using a

spot press (see paragraph 2-41)