TM-9-2610-200-14
CARE, MAINTENANCE, REPAIR, AND INSPECTION OF PNEUMATIC TIRES AND INNER TUBES
TECHNICAL MANUAL; OPERATOR'S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT; MAINTENANCE MANUAL
SEPTEMBER 2000
TM-9-2610-200-14 - Page 33 of 207
TM 9-2610-200-14
1-20
SECTION II.
EQUIPMENT DESCRIPTION AND DATA (Con't)
1-9.
TIRE MARKINGS AND CODES (Con't).
b.
TIRE SIZE DESIGNATIONS.
Tire size designations will vary depending on the application and where and when a tire is manufactured.
Presently the most common size designation systems in use are: P-Metric, European Metric, LT Metric,
Alpha-Numeric, Numeric, and Floatation. Examples of each of these systems with definitions follow:
Back to Top
