TM-9-2815-202-24P
ENGINES, DIESEL WITH CONTAINERS; MODEL 7083–7391, 7083–7395 AND 7083–7396
TECHNICAL MANUAL; REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2003
TM-9-2815-202-24P - Page 14 of 288
TM 9-2815-202-24P
0001 00
Source Code
Application/Explanation
PA
PB
PC
PD
PE
PF
PG
Stocked items; use the applicable NSN to request/requisition items
with these source codes. They are authorized to the category indicated
by the code entered in the 3rd position of the SMR code.
NOTE
Items coded PC are subject to deterioration.
KD
KF
KB
Items with these codes are not to be requested/requisitioned individually. They
are part of a kit which is authorized to the maintenance category indicated in the 3rd
position of the SMR code. The complete kit must be requisitioned and applied.
MO - Made at unit/
AVUM Level
MF-MadeatDS/
AVIM Level
MH-MadeatGSLevel
ML-MadeatSRA
MD - Made at Depot
Items with these codes are not to be requested/requisitioned individually. They
must be made from bulk material which is identified by the P/N in the DESCRIP-
TION AND USABLE ON CODE (UOC) column and listed in the Bulk Mate-
rial group work package of the RPSTL. If the item is authorized to you by the
3rd position code of the SMR code, but the source code indicated it is made at
a higher level, order the item from the higher level of maintenance.
AO - Assembled by unit/
AVUM level
AF - Assembled by DS/
AVIM level
AH - Assembled by
GS level
AL - Assembled by SRA
AD - Assembled by
depot
Items with these codes are not to be requested/requisitioned individually. The parts
that make up the assembled item must be requisitioned or fabricated and assembled at
the level of maintenance indicated by the source code. If the 3rd position code of the
SMR code authorizes you to replace the item, but the source code indicates the item
is assembled at a higher level, order the item from the higher level of maintenance.
XA
Do not requisition an “XA" coded item. Order its next higher assembly. (Refer to the
NOTE below.)
XB
If an “XB" item is not available from salvage, order it using the CAGE and P/N.
XC
Installation drawing, diagram, instruction sheet, field service drawings; identified by
the manufacturer's P/N.
XD
Item is not stocked. Order an “XD” coded item through normal supply chan-
nels using the CAGE and P/N given, if no NSN is available.
NOTE
Cannibalization or controlled exchange, when authorized, may be used as source of supply for items
with the above source codes, except for those source coded “XA" or those aircraft support items
restricted by requirements of AR 750-1.
Maintenance Code. Maintenance codes tell you the level(s) of maintenance authorized to use and repair support items. The
maintenance codes are entered in the third and fourth positions of the SMR Code as follows:
0001 00-2
Back to Top
