TM-9-2815-202-34

ENGINE, DIESEL W/CONTAINER: MODEL 7083-7395, 7083-7396, 7083-7398 AND 7083-7399

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

FEBRUARY 1990

TM-9-2815-202-34 - Page 309 of 670

8.

9.

10.

11.

12.

TM9-2815-202-34

Apply a few drops of cutting oil on bevel seat of injector tube (93). Lower reamer

(101 ) carefully into injector tube until it contacts bevel seat.

For trial cut, turn reamer (101) steadily without applying any downward force.

Remove reamer, clean out chips, and observe bevel seat to see what portion of

seat was cut.

Proceed with reaming and withdraw tool occasionally to observe progress.

Continue reaming until shoulder of spray tip is within +/- 0.014 inch of fire deck. Use

gages (99 and 100) to measure distance.

Wash interior of injector tube (93).

4-203