TM-9-2815-202-34

ENGINE, DIESEL W/CONTAINER: MODEL 7083-7395, 7083-7396, 7083-7398 AND 7083-7399

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

FEBRUARY 1990

TM-9-2815-202-34 - Page 329 of 670

TM9-2815-202-34

(5) Invert injector on fixture. Using

injector nut socket (10), loosen nut

(11) on injector body.

(6)

(7)

(8)

(9)

(10)

(11)

(12)

NOTE

When injector has been in

service for an extended period,

spray tip may not be easily

pushed from nut. In this case,

support nut on a wood block and

drive tip out with special tool (12).

Do not dislodge spray tip and

valve parts during injector nut

removal.

Lift injector nut (11) straight up.

Remove spray tip assembly (13),

spring cage (14), spring seat (15),

valve spring (16), check valve cage

(17), and check valve (18).

Remove spill deflector (19).

Lift bushing (20) straight out of

injector body (21).

Remove injector body from fixture.

Turn body upside down and catch

gear retainer (22) and gear (23) in

hand as they fall from body.

Remove injector control rack (24) from

body (21).

Remove seal ring (25) from body.

Discard seal ring.

4-223