TM-9-2815-202-34

ENGINE, DIESEL W/CONTAINER: MODEL 7083-7395, 7083-7396, 7083-7398 AND 7083-7399

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

FEBRUARY 1990

TM-9-2815-202-34 - Page 409 of 670

TM 9-2815-202-34

(4) Drive seal (19) into front cover (16)

with seal installer tool (20).

(5) Remove any excess sealant.

d. Installation

(1)

(2)

(3)

(4)

(5)

(6)

Affix gasket (18) to inner face of front

cover (16).

Position dirt deflector (17) onto

crankshaft with flat surface toward

engine.

Coat lip of oil seal lightly with grease

or vegetable shortening.

Position front cover (16) over two

alinement pins (21) and tap cover

until it contacts cylinder block.

Install four bolts (11), two bolts (12),

six lockwashers (13), two bolts (14),

and two Iockwashers (15) to lower

front cover (16).

Torque bolts (14) to 25-30 Ib-ft

(34-41 N-m) and bolts (11 and 12) to

80-90 Ib-ft (108-122 N-m).

5-31