TM-9-2815-202-34

ENGINE, DIESEL W/CONTAINER: MODEL 7083-7395, 7083-7396, 7083-7398 AND 7083-7399

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

FEBRUARY 1990

TM-9-2815-202-34 - Page 490 of 670

TM 9-2815-202-34

6-3. TURBOCHARGER REMOVAL/lNSTALLATION (Cont)

c. Installation

(1) install gasket (10)on exhaust tee (9).

(2) Slide hose (5) and two clamps (4) onto air inlet housing (6). Slide rubber connector (2) and

two clamps (1) onto oil drain tube (3).

WARNING

Engine components are heavy. To prevent personal injury, use extreme

caution when removing large components from engine.

CAUTION

Turbocharger is heavy. Use two persons or lifting device to prevent dropping and

damage to turbocharger.

(3)

(4)

(5)

Install turbocharger (7) on exhaust tee (9) and secure with six locking nuts (8). Torque nuts to

83-93 Ib-ft (113-126 N-m).

Slide hose (5) and two clamps (4) from air inlet housing (6) onto turbocharger (7). Tighten

clamps.

Slide rubber connector (2) and two clamps (1) on turbocharger oil drain tube (3) onto

flywheel housing cover (11 ). Tighten clamps.

END OF TASK

FOLLOW-ON MAINTENANCE

Para Description

6-2

Install turbocharger regulator air line

3-11 Install turbocharger oil supply line

6-8