TM-9-2815-205-24

6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE

FEBRUARY 2013
TM-9-2815-205-24

  TM-9-2815-205-24 - Page 50 of 856

LIST OF ABBREVIATIONS/ACRONYMS - Continued
Table 1.
List of Abbreviations/Acronyms - Continued.
TM
Technical Manual
TMDE
Test, Measurement, and Diagnostic Equipment
tu
Tube
V
Volt
WP
Work Package
QUALITY OF MATERIAL
Material used for replacement, repair, or modification must meet the requirements of this TM 9-2815-205-24. If
quality of material requirements are not stated in this TM 9-2815-205-24, the material must meet the requirements
of the drawings, standards, specifications, or approved engineering change proposals applicable to the subject
equipment.
ENGINEERING CHANGE PROPOSALS (ECP)
Engineering change proposals (ECPs) will be submitted using STA 1692 or STA 1695 (Engineering Change
Proposal [Short Form]). Completed forms should be mailed direct to: Commander, U.S. Army TACOM Life Cycle
Management Command. The postal mail address is U.S. Army TACOM Life Cycle Management Command,
ATTN: AMSRD-TAR-E/PDQR, MS 268, 6501 E. 11 Mile Road, Warren, MI 48397-5000. A reply will be furnished
to you.
REPAIR PARTS, SPECIAL TOOLS, TEST, MEASUREMENT, AND DIAGNOSTIC EQUIPMENT (TMDE), AND
SUPPORT EQUIPMENT
SUPPORTING DATA FOR REPAIR PARTS, SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT
COMMON TOOLS AND EQUIPMENT
For authorized common tools and equipment, refer to the Modified Table of Organization and Equipment (MTOE),
CTA 50-970, Expendable/Durable Items (Except: Medical, Class V, Repair Parts, and Heraldic Items), or
CTA 8-100, Army Medical Department Expendable Items, as applicable to your unit.
SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT
The special tools, TMDE, and support equipment required to accomplish the maintenance procedures peculiar to
this technical manual are listed and illustrated in Repair Parts and Special Tools List (TM 9-2815-205-24P).
The fabricated tools required to accomplish the maintenance procedures peculiar to this technical manual are
listed in (WP 0081) along with fabrication instructions.
REPAIR PARTS
Repair parts are listed and illustrated in Repair Parts and Special Tools List (TM 9-2815-205-24P).
END OF WORK PACKAGE
TM 9-2815-205-24
0001
0001-6


Back to Top