TM-9-2815-205-34
ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
AUGUST 1992
TM-9-2815-205-34 - Page 558 of 596
ITEM
A
ITEM
B
1.
2.
3.
4.
5.
6.
7.
8.
9.
Fabricate end plate from 3/8-inch thick steel plate, item (A).
Fabricate gasket for end plate from 1/8-inch thick rubber material except with 0.5-inch diameter
hole in center.
Quantity required, one each.
Additional items: Two bolts (3/8-16 x 1) . . . . . . . . . NSN 5305-00-269-3211.
Fabricate blocking plates from 3/8-inch thick steel plate, item (B).
Fabricate gaskets for blocking plates from 1/8-inch thick rubber material.
Quantity required, four each.
Additional items: Eight bolts (5/8-11 x 6) . . . . . . . . NSN 5305-00-724-6767
Sixteen flat washers (5/8) . . . . . . NSN 5310-00-003-9174
Eight nuts (5/8-11) . . . . . . . . . . . NSN 5310-00-763-8920.
All dimensions are in inches.
FIGURE D-6 . CYLINDER HEAD PRESSURE TESTING KIT (P/N 11 650232)
TM 9-2825-205-34
NOTE S
D-7
Back to Top
