TM-9-2815-210-34-2-1

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2

APRIL 1981

  TM-9-2815-210-34-2-1 - Page 107 of 259

TM 9-2815-210-34-2-1
3-15. OIL COOLER AND OIL COOLER FILTER HOUSING.
a. Oil Cooler.
FRAME 1
NOTE
On some engines, oil cooler water inlet tube (1) is
joined to water pump (2) with mounting flange (3).
On other engines, oil cooler water inlet tube is joined
to water pump with hose (4) and clamp (5).
1.
For engines with mounting flange (3), take out four nuts and lockwashers (6).
2.
For engines with hose (4) and clamp (5), loosen clamp.
3.
Loosen hose clamp (7).
Take off oil cooler water inlet tube (1).
4.
For engines with mounting flange (3), take off and throw away gasket (8).
GO TO FRAME 2
3-59


Back to Top