TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 786 of 968

TM 9-2815-210-34-2-2

FRAME 2

1.

Put fuel filter (1) in place. Put on three lockwashers with three nuts (2).

2.

Put fuel filter-to-fuel density compensator tube (3) in place. Screw on and

tighten fitting nut (4).

3.

Put fuel inlet tube (5) and fuel return tube (6) in place. Screw on and

tighten two fitting nuts (7).

4.

Put two drain tubes (8) on fuel filters (1) as shown and put on two

clamps (9).

END OF TASK

5-157