TM-9-2815-220-24

AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

  TM-9-2815-220-24 - Page 1128 of 1563

TM 9-2815-220-24
CYLINDER ASSEMBLY REPAIR
0135 00
REPAIR (Continued)
CAUTION
After new valve guides are installed, they must be reamed to specified
size to assure proper clearance between valve guide and valve stem.
NOTE
The intake and exhaust valve guides are reamed in the same manner.
Separate reamers and bushings are used for each.
Reamer bushing
11642088 (item 15, WP 0176) is used for intake valve guide, and
11642089 (item 14, WP 0176) is used for exhaust guide.
6. Ream valve guides.
a. Install reamer bushing (27) (use item 15 for intake, item 14 for exhaust, WP 0176) and
hand reamer (28).
b. Ream intake valve guide with rough hand reamer (28) (item 96, WP 0176) and then with
finish reamer (29) (item 94, WP 0176).
c. Ream exhaust valve guide with rough hand reamer (item 95, WP 0176) and then with
finish reamer (item 93, WP 0176) (similar to illustration).
28,29
28,29
27
WP 0135 00-14


Back to Top