TM-9-2815-220-24

AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

  TM-9-2815-220-24 - Page 1275 of 1563

TM 9-2815-220-24
DAMPER/OIL FILTER HOUSING ASSEMBLY REPLACE/REPAIR
0151 00
INSTALLATION (Continued)
1. Install damper/oil filter housing (1) (Continued):
NOTE
There are fourteen studs that secure the damper/oil filter housing to
the crankcase.
Some of the studs also secure various brackets and
hose clamps.
At this time only torque the studs indicated, the
remaining studs will be torque-tightened at the time of bracket
installation.
f. Apply Lubriplate (item 23, WP 0173) to threads of six mounting studs (X).
g. Secure housing (1) using six new self-locking nuts (5) (item 34, WP 0175) with flat
washers (6).
Torque six self-locking nuts (5) to 225-250 inch-pounds (25-28 N
m).
h. Apply Lubriplate to threads of 12 screws (2) and install with flat washers (3).
Torque
screws to 150-175 inch pounds (17-20 N
m).
3 (twelve places)
2 (twelve places)
X
X
5 (six places, marked by X)
6 (six places, marked by X)
X
X
END OF WORK PACKAGE
WP 0151 00-13 (14 Blank)


Back to Top