TM-9-2815-220-24

AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TM-9-2815-220-24 - Page 1287 of 1563

TM 9-2815-220-24

OIL PAN ASSEMBLY REPLACE/REPAIR

0152 00

INSTALLATION (Continued)

1. Install oil pan. (Continued)

c. Attach sling assembly (10) (For 2CA/2DA, item 38, WP 0176) (For 2DR, item 37,

WP 0176) to engine (11) lifting eyes (12) and to a suitable lifting device.

d. Take slack out of lifting device and remove four screws (13) and four flat washers (14)

securing engine to rollover stand (15).

e. Lift engine (11) from maintenance stand (15) and carefully lower onto the oil pan (1).

f.

Install two new self-locking nuts (8) (item 34, WP 0175) with flat washers (9) (one on each

side of pan, near the center) to secure oil pan (1) to engine (11).

g. Mount engine (11) onto maintenance stand (15) (item 111, WP 0176).

(1) Secure engine (11) to maintenance stand (15) with four screws (10) and four flat

washers (11).

h. Remove sling assembly (10).

i.

Install 27 new self-locking nuts (8) (item 34, WP 0175) with flat washers (9) on each side

of oil pan (1).

j.

Alternately tighten 56 new self-locking nuts (8) to 275-300 inch pounds (31-33.9 N

•

m).

11

15

13,14

12

10

8,9

WP 0152 00-11