TM-9-2815-220-24
AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines
TM-9-2815-220-24 - Page 1497 of 1563
TM 9-2815-220-24
TOOL IDENTIFICATION LIST
0176 00
13
Brass Wire Probes (1/8 inch) RCUZN-B
0.125
(CTA 50-970)
14
*
Bushing, Reamer Pilot:
Exhaust Valve
11642089
(TM 9-2815-247-34P)
Used with REAMERS–
7083696 and 7083697
to ream exhaust valve
guide hole
15
*
Bushing, Reamer Pilot:
Intake Valve
11642088
(TM 9-2815-247-34P)
Used with REAMERS–
7083699 and 7083698
to ream intake valve
guide hole
16
Caliper Set, Micrometer,
Inside
124BZ
(SC 4910-95-CL-A63)
17
Caliper Set, Micrometer,
Outside
S436CRLZ
(SC 4910-95-CL-A63)
18
Chain, Lift Assembly
624-009-
010-040
(CTA 50-970)
19
Clamp, Hose
AA52506-F
(CTA 50-970)
20
Cleaner, Oil Cooler
11641959
21
*
Compressor, Piston Ring
10882888
(TM 9-2815-247-34P)
Installing standard
pistons and rings in
cylinders
22
*
Compressor: Piston Ring,
0.010 and 0.020 inch
Oversize
10882888-1
(TM 9-2350-253-20-1)
Installing 0.010- or
0.020-inch oversize
pistons and rings in
cylinders
23
*
Compressor: Piston Ring,
0.030 and 0.040 inch
Oversize
10882888-2
(TM 9-2815-220-34P)
Installing 0.030- or
0.040-inch oversize
pistons and rings in
cylinders
24
*
Compression Testing,
Cylinder:
Gauge Assembly
10899180
(TM 9-2815-247-34P)
Used with ADAPTER–
8743025 to check
cylinder compression
25
*
Crankcase Protector:
Cylinder Mounting Pads
10882790
(TM 9-2350-253-20-1)
Protecting crankcase at
cylinder removal
(1 required per cylinder)
26
*
Crankshaft and Connecting
Rod Sling
10882958
(TM 9-2815-247-34P)
Removing and installing
engine crankshaft
27
*
Crowfoot Attachment,
Socket Wrench
FRH-240S
(TM 9-2815-247-34P)
Removing fuel injection
tube nut from nozzle
28
Crowfoot Attachment,
Socket Wrench, 3/4
1C2690
(SC 4910-95-CL-A31)
29
Crowfoot Attachment,
Socket Wrench, 7/16
3308
(SC 4910-95-CL-A31)
WP 0176 00-3
Back to Top
