TM 9-2815-220-24
SIGNAL WIRING HARNESS REPLACEMENT (2DR) (PN 11671816, 10887570) 0059 00
REMOVAL (Continued)
10. Remove loop clamp (34) with screw (35) and lock washer (36).
Discard lock washer.
11. Remove loop clamp (37) with self-locking nut (38).
12. Disconnect wiring harness at engine oil pressure transmitter (39), low engine oil pressure
switch (40), and engine oil pressure switch (41).
13. Disconnect wiring harness at engine oil high temperature switch (42), engine oil temperature
switch (43), and hour meter (44).
14. Remove screw (45) with lock washer (46) and remove hour meter (44) ground lead (47).
45, 46
47
44
39
42
43
40
34
35, 36
37, 38
39
41
WP 0059 00-6