GENERATOR WIRING HARNESS REPLACEMENT (2CA) (PN 11655451)
2. Install generator wiring harness (continued).
h. Ensure that electrical lead (ground) terminals (6) are clean.
Secure the right lower ground lead with a flat washer (8) on each side of the lead using
support mounting screw (9).
Remove lower right generator support screw (9) and flat washers (8).
k. Secure right upper lead with a flat washer (8) on each side of the lead using a new support
mounting screw (3/8-24 x 1-3/4 long) (7).
m. Install assembled ground strap (s) and bus bar on generator terminal and secure using
original self-locking nut (4) with flat washer (5).
WP 0063 00-16