TM-9-2815-220-24
AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines
TM-9-2815-220-24 - Page 877 of 1563
TM 9-2815-220-24
INTAKE MANIFOLD ASSEMBLY REPLACE/REPAIR
0108 00
DISASSEMBLY (Continued)
2. Remove intake manifold elbow (8) and heater tube (9).
a. Remove six self-locking nuts (10) with flat washers (11) to remove intake manifold
elbow (8) and heater tube (9) as a unit.
Discard self-locking nuts.
b. Remove and discard gasket (12).
c. Remove six self-locking nuts (13) to separate heater tube (9) from elbow (8).
Discard
gasket (14) and self-locking nuts (13).
3. Remove two tubes (15).
a. Remove eight self-locking nuts (16) and intake manifold tubes (15).
Discard self-locking
nuts.
b. Remove and discard two gaskets (17).
4. Remove tubes (18, 19, 20, and 21).
a. Remove twelve self-locking nuts (22) securing tubes (18, 19, 20, and 21) to intake
manifold (23) and remove tubes.
Discard self-locking nuts.
b. Remove spring tension washers (24, 25), spacer rings (26, 27), O-rings (28, 29), and
flanges (30, 31) from tubes.
Discard O-rings.
30
18
19
22
31
16
24
26
17
28
11
10
23
29
27
25
15
12
20
8
10
11
9
14
13
21
WP 0108 00-3
Back to Top
