TM-9-2815-224-34-P

ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JANUARY 1988
TM-9-2815-224-34-P

  TM-9-2815-224-34-P - Page 19 of 554

TM 9-2815-224-34&P
Change 3
i
TECHNICAL MANUAL
HEADQUARTERS
DEPARTMENT OF THE ARMY
No. 9-2815-224-34&P
Washington, DC,
20 January 1988
DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
ENGINE, DIESEL: 8-CYLINDER, TURBOCHARGED
DETROIT DIESEL CORPORATION MODEL 8V92TA
Approved for public release; distribution is unlimited.
REPORTING ERRORS AND RECOMMENDING IMPROVEMENTS
You can help improve this publication. If you find any mistakes or if you know of a way to improve the
procedures, please let us know. Submit your DA Form 2028 (Recommended Changes to Equipment
Technical Publications), through the Internet, on the Army Electronic Product Support (AEPS) Web site.
The Internet address ishttp://aeps.ria.army.mil. If you need apassword, scroll down and click on ±ACCESS
REQUEST FORM.² The DA Form 2028 is located in the ONLINE FORMS PROCESSING section of the
AEPS. Fill out the form and click on SUBMIT. Using this form on the AEPS will enable us to respond
quicker to your comments and better manage the DA Form 2028program. You may also mail, fax, or e-mail
your letter or DA Form 2028 direct to: AMSTA--LC--CI/TECH PUBS, TACOM--RI, 1Rock Island Arsenal,
Rock Island, IL 61299-7630. The e-mail address is TACOM--TECH--PUBS@ria.army.mil. The fax number
is DSN 793-0726 or Commercial (309) 782-0726.
M983 with crane and M985E1 without winch are no longer in the fleet. Ignore all references to these
vehicles. The M984E1 and M984A1 are the same vehicle. All references to M984E1 shall be interpreted as
the M984A1 model.
Repair Parts and Special Tools List for the engine, Diesel: 8-Cylinder, Turbocharged Detroit Diesel
Corporation Model 8V92TA (NSN 2815-01-257-3879) can be found in TM 9-2320-279-24P.
TABLE OF CONTENTS
Page
HOW TO USE THIS MANUAL
vii
................................................
CHAPTER 1
INTRODUCTION
1-1
..........................................................
Section I
Equipment and Maintenance Reports
1-1
..........................................
Section II
Equipment Description
1-3
....................................................
Section III
Principles of Operation
1-7
.......................................................
CHAPTER 2
MAINTENANCE INSTRUCTIONS
2-1
..........................................
Section I
General Information
2-1
.........................................................
Section II
Repair Parts and Special Tools
2-1
................................................
Section III
General Maintenance Practices
2-1
...............................................
Section IV
Organization of Maintenance Procedures
2-4
.......................................
Section V
Troubleshooting
2-7
...........................................................
CHAPTER 3
ENGINE BLOCK AND CYLINDER HEAD MAINTENANCE
3-1
..................
Section I
Information
3-1
.................................................................
Section II
Engine Block Assembly
3-2
.......................................................
Section III
Cylinder Head Assembly
3-38
......................................................


Back to Top