TM-9-2815-224-34-P

ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JANUARY 1988

TM-9-2815-224-34-P - Page 299 of 554

TM 9-2815-224-34&P

Fuel lnjector Maintenance Instructions (Cont)

(9)

(10)

(11)

(12)

(13)

(14)

(15)

are visible.

Look through bore of injector body (2) and move injector rack (5) until punch marks (6) on teeth

Aline timing mark (7) on gear (8) between two punch marks (6) on rack (5).

Install gear (8), recheck alinement from step (9), and repeat step (9) if necessary to get proper

alinement.

Install sleeve spacer (9).

NOTE

There are two colors of preformed packings. Model A is black and Model B is red.

Either packing may be used.

Install preformed packing (10) on shoulder of injector body (2).

Aline pin (11) in bushing (12) with slot in injector body (2) and slide end of bushing into injector

body.

Install spill deflector (13) over barrel of bushing (12).

Change 2

12-17