TM9-2815-224-34&P
Section II.
ENGINE BLOCK ASSEMBLY
Engine Block Maintenance Instructions
3-2. ENGINE BLOCK REPAIR.
This task covers:
a. Disassembly
d. Testing
b. Cleaning/Inspection
e. Follow-on Maintenance
c. Assembly
INITIAL SETUP
Models
Equipment Condition
All
TM or Para
Condition Description
Test Equipment
TM 9-2320-279-20 Engine circuit breaker
None
bracket removed.
TM 9-2320-279-20 Flange elbow removed.
Special Tools
TM 9-2320-279-20 Starter removed.
Remover/installer, core plug J23019
TM 9-2320-279-20 Oil cooler removed.
Remover/installer, water inlet adapter,
TM 9-2320-279-34 Engine mounted on engine
aftercooler J25275
stand.
Gage, cylinder checking J5347-01
Para 16-2
Aftercooler removed.
Gage, cylinder liner depth J24898
Para 3-3
Front end plate removed.
Engine block pressure testing kit 2SK737
Para 3-4
Rear end plate removed.
supplies
Para 3-5
Air box covers removed.
Para 3-6
Air box drains removed.
Oil, lubricating, Item 48, Appendix C
Para 8-2
Engine block breather pipe
Compound, sealing, lubricating, Item 31,
Appendix C
removed.
Para 4-5
Crankshaft removed.
Compound, sealing, pipe thread, Item 32,
Para 3-7
Cylinder head removed.
Appendix C
Antifreeze, permanent, Item 7, Appendix C
Special Environmental Conditions
Compound, International, No. 2, Item 26,
None
Appendix C
General Safety Instructions
Personnel Required
None
MOS 63W, Wheel vehicle repairer
Level of Maintenance
References
General Support
None
3-2