TM-9-2815-224-34-P

ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JANUARY 1988

TM-9-2815-224-34-P - Page 527 of 554

TM9-2815-224-34&P

Illustrated

List of Manufactured

Items

(Cont)

NOTES:

1.

2.

3.

4.

5.

6.

7.

FABRICATE FROM 3/4 INCH (19.05

MM) EXTERIOR GRADE

PLYWOOD.

DRILL 1-1/2 INCH (38. 1 MM) DIAMETER

HOLE IN CENTER OF BASE.

DRILL FOUR 1/2 INCH (12.7

MM) DIAMETER

HOLES IN CORNERS OF BASE.

ROUTE FOUR SLOTS 1/2 INCH (12.7

MM) DEEP, 3/4 INCH (38. 1 MM) WIDE, AND 6-5/8

INCHES (153.02

MM) LONG IN BASE.

FABRICATE TWO FINGERS FROM PLYWOOD 1-15/16

INCHES (49.2 1 MM) HIGH, 2-1/2

INCHES (63.5

MM) LONG, AND 1-1/4 INCH (31 .75 MM) WIDE.

GRIND BOTTOM OF FINGERS 23/32

INCH (18.25

MM) WIDE AND 7/16 INCH(11.

11 MM)

HIGH. CONTUR

FRONT SURFACE OF FINGERS TO FIT TURBINE WHEEL BLADES.

ALL DIMENSIONS ARE IN INCHES (MM).

Figure D-4.

Turbocharger Holding Fixture (P/N 2SK742)

D-5