TM-9-2815-225-34-P

ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2005

TM-9-2815-225-34-P - Page 508 of 736

TM 9-2815-225-34&P

0054 00

0054 00-6

WEAR LIMITS (Contd)

PART

DESCRIPTION/LOCATION

WEAR LIMIT

Accessory drive gear to camshaft

gear

Backlash

0.002 in. (0.051 mm) minimum –

0.016 in. (0.406 mm) maximum

Oil pump drive gear

Backlash between gears

0.002 in. (0.051 mm) minimum –

0.016 in. (0.406 mm) maximum

Oil pan mounting flange on gear

cover with oil pan mounting flange

on cylinder block

Alignment

Gear cover must be even with front

cylinder block flange within 0.004

in. (0.102 mm)

Mounting flange of camshaft support

and gear cover

Thickness of shim pack

0.008 in (0.203 mm) minimum –

0.13 in. (3.302 mm) maximum

Flywheel, flexplate, and flywheel

housing dowel pins

Outside diameter

0.5005 in. (12.713 mm) minimum

Crankshaft

Alignment must not

exceed

0.008 in. (0.203 mm)

Table 1. Wear Limits (Contd).

END OF WORK PACKAGE