TM-9-2910-226-34

PUMP, FUEL, METERING AND DISTRIBUTING, ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT, MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

JUNE 1974
TM-9-2910-226-34

  TM-9-2910-226-34 - Page 164 of 208

TM 9-2910-226-34
g.
1-Year
Allowances per 100 Equip-
merits/contingency Planning Purposes, Column (8).
This column indicates the requirement for con-
tingency planning purposes. An asterisk indicates
authorization to obtain or use as required. This
column is left blank except for the special tools list.
h.
Depot Maintenance Allowances per 100
Equipment,
Column (9).
This column indicates
authorization for depot use. This column is left
blank.
i. Illustration,
Column (JO).
This column is
divided as follows:
(1)
Figure Number, Column (10) (a).
Indicates
the figure number of the illustration in which the
item is shown.
(2)
Item Number, Column (10) (b).
Indicates
the callout number used to reference the item in the
illustration.
B-4. Special Information.
a.
Identifications of the
usable-on codes for the pumps and the engine
assemblies they are used on are included at the end
of the description column, column (3) of this
publication, and are:
D
A
B
C
E
F
G
Blank
LDS-465-2 Engine Assembly
LDS-465- 1A Engine Assembly
LD-465-1 Engine Assembly
LD-465-lC Engine Assembly
LDT-465-lC Engine Assembly
LDS-465- 1 Engine Assembly
LDS-427-2 Engine Assembly
Applicable to all pump assemblies
b.
The basis of issue for authorized special tools,
and test and support equipment is the number of end
items of equipment supported and the number of
maintenance personnel allocated to perform the
required maintenance operations (such as, six of
each tool for each 100 pumps supported).
c.
Parts which require manufacture or assembly
at a category higher than that authorized for in-
stallation will indicate in the source column the
higher category.
d.
Certain parts are supplied in parts kits and
gasket sets. When a kit is composed of parts which
are normally in more than one group, the kit will be
listed in only special purpose kits section. Com-
ponents of the kit which are not in that particular
group will appear in their normal group listing with
an appropriate reference to the kit. Component parts
of a kit which have a Federal stock number and are
source coded P may be procured as line items.
e.
The following publications are the up-assembly
of Pump, Fuel, Metering and Distributing,
Assemblies 2910-1 16-8241, 2910-178-1185, 2910-759-
TM 9-2815-210-34P
Direct support and general support
maintenance repair parts and special
tools list (including depot main-
tenance repair parts and special
tools): Engine,
diesel (multifuel):
turbocharged, fuel injected, water
cooled, 4-cylinder assembly (military
models LD-465-1, 2815-239-5834,
LG-465-lC, 2815-134-4830, LDT-
465-1C, 2815-103-2642, LDS-465-1,
2815-075-0087, LDS-465-1A, 2815-
239-5819, and LDS-465-2, 2815-808-
8011 and clutches).
TM 9-2815-204-34P
Direct support and general support
maintenance repair parts and special
tools list (including depot main-
tenance repair parts and special
tools): Engine, diesel: with container
liquid cooled, V-type, six cylinder
(2815-022-6732) composed of:
engine, diesel: (Detroit Diesel-GMC
model 5063-5299, series 6V53) and
container (8115-202-8589) engine,
diesel: with container (2815-909-
5949) composed of: engine, diesel:
(Detroit Diesel-GMC model 5063-
5398 series 6V53T) and container
assembly (8115-999-5336).
f.
Tables B-1 and B-2 are provided as a rapid
index to all recoverable, direct exchange items and
repair kits and sets contained in this manual. The
items in table B- 1 are in FSN sequence and the items
in table B-2 are listed in functional group sequence.
B-5. How to locate Repair Parts.
a.
When Federal
stock number or reference number is unknown.
(1) First. Using the table of contents, deter-
mine the appropriate group, subgroup, or assembly
group; i.e., fuel supply pump. governor; etc., within
which the repair part belongs. This is necessary since
illustrations are prepared for groups and subgroups,
and listings are divided into the same groups.
(2)
Second.
Find the illustration covering the
group, or subgroup,
to which the repair part
belongs.
(3)
Third.
Identify the repair part on the
illustration and note the illustration figure and item
number of the repair part.
(4)
Fourth.
Using the repair parts listing, find
the group or subgroup, to which the repair part
belongs and locate the illustration figure and item
number noted on the illustration.
b.
When Federal stock number or reference
number is known:
(1)
First.
Using the index of Federal stock
numbers and reference numbers find the pertinent
Federal stock number or reference number. This
index is in ascending FSN sequence followed by a list
of reference numbers in ascending alphanumeric
sequence, cross-referenced to the illustration figure
number and item number.
B-2


Back to Top