TM 9-2920-225-34
FRAME 3
I
1.
2.
3.
4.
GO
Coat insulator mount (1) with sealer compound on both sides. Place insulator
mount in housing (2), alining holes.
NOTE
Housing (2) is marked POS. and NEG. so rectifiers
will be put back the right way. Positive rectifier has
an epoxy coating for insulation and negative rectifier
(3) has no coating.
Place negative rectifier (3) in housing (2). Put in two screws (4) and
capacitor (5).
Put two nuts (6), flat
stud (8) .
Put capacitor (5) lead
TO FRAME 4
washers ( 7), and ground leads on negative rectifier
on with nut (8) and lockwasher (10).
TA 103642
2-142