TM-9-2920-225-34

GENERATOR ASSEMBLY; PRESTOLITE AMA-5102UT; LEECE-NEVILLE 3002AC, 3002AD, 3002AE, 5504AA, 5504AB, 2184AC, 5300GP

TECHNICAL MANUAL; MAINTENANCE; DIRECT AND GENERAL SUPPORT LEVEL

FEBRUARY 1981

TM-9-2920-225-34 - Page 177 of 262

TM 9-2920-225-34

d. Cleaning.

There are no special cleaning procedures needed. Refer to

cleaning procedures given in para 1–3.

e. Inspection and Repair.

1.

2.

3.

4.

5.

NOTE

Readings must be within limits given in table 2-5. If

readings are not within given limits, generator is non-

repairable.

Check that end housing (1) and bearing retainers (2 and 3) have no cracks

or breaks. If parts are damaged, generator is nonrepairable.

Measure end housing bearing bore (4).

Check that screws (5) are not bent or broken and that they have no stripped

threads or damaged heads. If screws are damaged, get new ones.

Measure bearing (6) inside diameter (7) and outside diameter (8). If inside

and outside diameters are not within limits given in table 2-5, get new

bearing.

Check that bearing (6) is not damaged. Refer to TM 9-214.

GO TO FRAME 2

Table 2-5. End Housing Assembly Wear Limits

Index

Number

4

7

8

Item /Point of Measurement

Inside diameter of end housing

bearing bore

Inside diameter of end housing

bearing

Outside diameter of end housing

bearing

Size and Fit

of New Parts

(inches)

1.8497 to 1.8501

0.7870 to 0.7874

1.8499 to 1.8504

Wear Limits

(inches)

None

None

None

2-161