TM-9-3990-260-14-P
CONTAINER ROLL-IN/OUT PLATFORM (CROP) MODEL M3 AND MODEL M3A1
TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
JULY 2001
TM-9-3990-260-14-P - Page 6 of 306
TM 9-3990-260-14&P
d
•
Ensure forklift tines are horizontal or pointed slightly downward to ensure they do not
contact crossmembers or the underside of the deck when the tines are being inserted
under the CROP or when the CROP is being lifted from the front. Prior to lifting,
ensure the tines are in full contact with the front beam and are not contacting cross-
members. Failure to comply may result in damage to equipment.
•
Ensure forklift tines are positioned to the outside of the CROP main beams, between
the main beams and the multipurpose provisions. Do not attempt to lift front of CROP
with forklift tines on the inside of main beams. Failure to comply may result in dam-
age to equipment.
•
Exercise extreme caution to ensure the CROP is properly aligned to be inserted into
the ISO container. The CROP is designed with less than 1/2 inch clearance on either
side between the CROP and ISO container door frame. Failure to comply may result
in damage to equipment.
•
Ensure forklift tines are horizontal or pointed slightly downward to ensure they do not
contact crossmembers or the underside of the deck when the tines are being inserted
under the CROP or when the CROP is being lifted from the front. Prior to lifting,
ensure the tines are in full contact with the front beam and are not contacting cross-
members. Failure to comply may result in damage to equipment.
•
Ensure forklift tines are positioned to the outside of the CROP main beams, between
the main beams and the multipurpose provisions. Do not attempt to lift front of CROP
with forklift tines on the inside of main beams. Failure to comply may result in dam-
age to equipment.
Back to Top
