TM-9-3990-260-14-P
CONTAINER ROLL-IN/OUT PLATFORM (CROP) MODEL M3 AND MODEL M3A1
TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
JULY 2001
TM-9-3990-260-14-P - Page 90 of 306
TM 9-3990-260-14&P
2-52
Change 1
a.
Stencils.
The word “LIFT” is stenciled at six places on CROP, two on each side and two in the
front. The word “CARC” is stenciled on right front of front beam. The words “NO LIFT” are stenciled on the angle
iron brace at the bottom of the end structure assembly.
b.
Identification and Shipping Data Plates.
Refer to Figure 2-2 for location and descrip-
tion of plates.
NOTE
The identification plate weight changes for the M3 CROP (S/N SC09001 and up) are as follows:
TARE WEIGHT = 3,730 LB (1,692 KG)
PAYLOAD WEIGHT = 32,520 LB (14,751 KG)
Figure 2-2. Location and Description of Decals and Instruction Plates
Item
Description
1
Forklift fork insertion lift points, side.
2
Forklift fork insertion lift points, front.
3
Identification Plate.
4
Shipping Plate.
5
“No Lift” point.
2-19.
M3 CROP DECALS AND INSTRUCTION PLATES.
Back to Top
