PS Magazine - TB 43-PS-605

PS, The Preventative Maintenance Monthly

ISSUE 605

APRIL 2003

PS Magazine - TB 43-PS-605 - Page 31 of 33
PS 605
APR 03
59
Water Tanks…
fill-line reminder
y
ou’ll end up with wet boots and a burst 3,000-gal onion tank, GTA-Z60 TPW,
NSN 5430-01-469-8744, if you follow the info on Page 0002 00-2 of TM 10-5430-
237-12&P.
That’s because the water fill level says 45 inches. That’s wrong—it should be
32 inches!
Filling the onion tank to 45
inches is almost the equivalent of
5,000 gallons of water. The tank
will rupture and break at that
level. It’s only designed to hold
3,000 gallons of water.
Play it safe with no more
guesswork. Use a yardstick to
mark a line at 32 inches around
the tank with a permanent marker.
In the meantime, make a note of
the error until there’s a change or
revision to the technical manual.
PS 605
APR 03
58
Mark a 32” fill line
around onion tank
trying to find
repair parts for
the 3,000 gph
trailer-mounted
ROWPU will have
you scratching
your head.
That’s because
some of these
old parts are no
longer available
or the parts info
in the tm has
changed.
nope.
not this’un
neither.
that’s the
last drawer. I
guess we
don’t
have the parts
you need.
OK, so
now
how
am I going
to get
working
again!?
there,
there. I’m
sure Connie
can help
us out!
head
for high
ground!
surf’s
up!!
I just
showered
this
morning!
3,000 GPH Trailer-Mounted ROWPU…
Make a note of
these changes in
tm 10-4610-232-24P
until there’s a
change or revision
to the technical
manual.
605. 58-59 (C)
2/22/03
6:23 PM
Page 1


Back to Top
Back to Top