PS Magazine - TB 43-PS-607
PS, The Preventative Maintenance Monthly
ISSUE 607
JUNE 2003
PS 607
UH-60A/L…
Oops
, we goofed! On Page 37
of PS 596 (Jul 02), the drawing
measurements to make the posi-
tioner tool are off.
The diagram did not show that
the critical distance between the
two pin bolts is 5 inches from the
outside of the first bolt, across
the center of the tool to the out-
side of the second bolt.
With the previous instructions
the positioner tool won’t fit
properly, and you’ll have to
grind off about .030 inches from
each bolt on the outside edge to
make the tool fit.
PS 607
JUNE 03
34
21
°
3.105r
3.105r
2.397
2.397
2.375
21
°
27
°
.350
Dia.
.250
Dia.
5.875"
.500"
.380"
.400"
.244"
.250"
2.025r
3.105r
2.46r
2.77r
2.397
2.375
2.375
.500 O.D.
.506
.506
.350 Dia.
.250 Dia.
21
°
27
°
45
°
Note
7
Note 5
this new tool
doesn’t quite fit
on the oil filter
sleeve.
This
one
should do
the trick!
both the martians
and the environment
are our enemy. but,
preventive mainte-
nance will enable
us to defeat
both
enemies.
let’s
show
those mar-
tians what
uncle sam
and his
soldiers
can do.
I’m
ready
on your
command,
sir.
thank you master
sergeant half-
mast. I think we
have a better
picture of what
it’ll take to win a
war on mars.
“we now have
computers but
let me add a
few other new
things.”
editor’s comment:
we took those martians
to school and taught
them a hard lesson. we
learned a few things
that helped us when
we bailed out europe
during world war II.
the martians are no
longer a threat, but
there always seem to
be “martians in earth-
ling clothing” who want
to rule the world.
Some of them we might
find in environments
similar to mars.
if we do, we need to
be ready with our
greatest weapon:
preventive
maintenance.
“all these are
subject to sand,
heat and moisture
damage. preventive
maintenance will
keep them in
working order.”
• Digital radios
• radar
systems
• aiming and
firing devices
• night vision
devices
Here’s a
corrected
diagram to
make the
tool. Make
a note until
the TM is
updated.
607. 34-35 (C)
5/2/03
1:41 PM
Page 1
Back to TopBack to Top
