PS Magazine - TB 43-PS-679
PS, The Preventative Maintenance Monthly
ISSUE 679
JUNE 2009
U
sers of the cryptographic key transfer unit, AN/PYQ-10(C) simple key loader, NSN
5810-01-517-3587, should download TM 11-5810-410-13&P. The TM is found on
EM 0164 and can be accessed at the LOGSA website:
There are some changes to the TM that you should note.
First,
the retaining ring, NSN 5310-01-524-9456, that held the lanyard to
the loader is no longer available as a separate part. To get the ring, you must order
the entire lanyard, NSN 5895-01-525-0352. The lanyard is Item 6 in Table 1 of
WP 0038-4. Disregard the “how to” instructions on Pages 0036-10 through 0036-11.
These instructions are being revised.
Second,
you cannot get the USB cable, NSN 6145-01-525-2777. At one time, it
was offered as an additional authorized item, but it was never Felded. Delete that
NSN from your Fles. The replacement for the cable is USB adapter, NSN 5995-01-
545-0167. It’s issued with the simple key loader. However, you can order it. It’s Item
16 in Table 1 of WP 0038-4.
Currently, there are restrictions on the use of the USB port.
Other options for downloading software like using a Fll
port cable and running the utility program should be
used. However, when these restrictions are lifted,
it will be good for you to have the USB adapter.
Third,
the battery charger assembly, NSN
6130-01-548-1505, has three components that
can be ordered separately. If you need just the
charger, order it with NSN 6130-01-525-1640.
If you need just the power cord, order it with
NSN 6150-01-551-3064. If you need the AC/DC
adapter, order it with NSN 6130-01-551-3902.
42
PS 679
JUN 09
43
PS 679
JUN 09
AN/PYQ-10(C).
..
PP-8496/U SDD1…
Take a
Test for
Battery
Health
What is the
condition of
your BB-2590/U
and BB-390B/U
batteries?
Are they
healthy
or
sick?
Determine their
condition by
testing them
with the SDD
1
battery health
indicator, PP-
8496/U, NSN
To test a
battery, the
battery must be
fully charged.
Once the battery
health indicator
is attached and
activated, it will
drain the battery
in a controlled
discharge. While
the battery is
discharging, the
health indicator
is analyzing.
Now press the START/RECALL button on the
indicator. The LED will illuminate, showing either
red, yellow
or
green.
if it’s
red,
your
battery’s
dead!
if it’s
yellow,
you can train with
this
fellow!
if it’s
green,
your
battery is
fit for
the scene!
After
the test,
recharge
a yellow
or green
battery
and
you’re
ready
to go!
I’ve been
feeling
a bit
drained.
I may have
“yellow”
fever!
if you have
questions, call
the simple key
loader help
desk toll free,
1-866-651-1199.
Simple
Key Loader
Component
I may have
a
new TM,
but these
are some
even
newer
changes!
poor
babies.
glub!
679.42-43.indd
1-2
5/4/09
5:29:56 PM
Click here for a copy of this article to save or email.
Click here for a copy of this article to save or email.
Back to TopBack to Top
