PS Magazine - TB 43-PS-725
PS, The Preventative Maintenance Monthly
ISSUE 725
APRIL 2013
38
PS 725
APR 13
Turning in Aiming Lasers
If you have unserviceable aiming lasers, you need to turn them in so they can be
Fxed and returned to the Feld. Your property book ofFcer should report them to the
National Inventory Control Point (NICP) B14, using an ±TE (report of excess) and
following the instructions in Chap 7 of AR 725-50,
Requisition and Issue of Supplies
and Equipment.
The NICP will respond with Fnal disposition instructions through an ±TR (reply to
report of excess) with exception data. The exception data require the unit to provide
a copy of the DD ±orm 1348 that documents the demilitarization of the aiming light
and is signed by the DOL or DLA Disposition Services. The serial number must be
included on the 1348.
Order a replacement by submitting a funded requisition through the standard
Army supply system.
If you have questions about any aiming lasers, contact Jeffrey York at DSN 312-
781-1344, (586) 282-1344, or email:
jeffrey.l.york2.civ@mail.mil
Unfortunately, you can’t do that without removing
the barrel clamp assembly. And the 120mm mortar’s TM
9-1015-256-13&P mentions nothing about that.
So, this TM will be changed to specify that the clamp
must first be removed before the cannon is checked. But,
in the meantime, note that in your -13&P, repairmen.
Barrel clamp instructions can be found in TM 9-1230-205-
13&P
Questions? Contact TACOM’s Erik Jensen at (586)
282-1220, DSN 786-1220, or email:
erik.s.jensen4.civ@mail.mil
NSN
Model
LIN
J03261
J03261
J03261
J68403
J68403
A44066
A44066
AN/PEQ-15 (tan)
AN/PEQ-15A (black)
AN/PEQ-15A (green)
AN/PEQ-14 (black)
AN/PEQ-14 (tan)
LA-8/P (right-handed)
LA-8/P (left-handed)
Aiming
Lasers…
Order Through CTA,
Turn in Unserviceables
M120A1 Mortar…
Remove Clamp
For
Inspection
YOU CAN NOW ORDER
Aiming lasers through
the standard supply
system!
That means you
no longer
need to
do an operational
needs statement
to get additional
aiming lasers.
You can just
order more
with a funded
requisition
through the Army
supply system!
no more red tape,
thank gOodnesS!
Here’s what is available:
TM 9-1000-202-14,
Evaluation of Cannon Tubes,
says
mortar repairmen need to check the M120A1’s cannon for
visible dents, out-of-roundness
and
external gouging.
Remove barrel clamp before
inspecting cannon
Aiming lasers with line
item numbers (LIN) J03261,
J68403 and A44066 are
now authorized
by Table
63 of CTA 50-909.
725 38-39.indd
1-2
3/6/13
11:04 AM
Click here for a copy of these articles to save or email.
Back to TopBack to Top
