PS Magazine - TB 43-PS-725

PS, The Preventative Maintenance Monthly

ISSUE 725

APRIL 2013

PS Magazine - TB 43-PS-725 - Page 20 of 33
36
PS 725
APR 13
If the M249 receiver still has
the grommet assembly, install the
front mounting sling assembly
like this:
1.±
Place the stud (1) into the thick
spacer (2).
2.±
Place and hold the lug (4) in the
inside of the grommet, lip end
first.
3.±
Add one drop of blue Loctite
®
246, NSN 8030-01-499-3589, to
the threads of the lug.
4.±
Screw the stud with spacer into
the lug and snug down the stud.
To install the rear mounting sling assembly:
1.±
Place the lug (6) through the hole in
the buttplate eyelet.
2.±
Install the stud lug (7) on the
opposite side of the buttplate eyelet.
3.±
Apply one drop of Locktite
®
to the
threads of the cap screw (8).
4.±
Attach the lug to the stud lug by
screwing the cap screw through
the lug and into the stud lug. Snug
down the cap screw.
To attach the quick-release swivel to the stud lugs:
1.±
Turn the thumb screw counterclockwise all
the way out.
2.±
Push in on the thumb screw and turn the
pivot plate to expose the sling swivel post.
3.±
Attach the sling swivel post to the lug or
stud lug.
4.±
Push in on the thumb screw and turn the
pivot plate up and onto the sling swivel
post. The thumb screw will spin on the
shaft and won’t lock down.
5.±
Screw the thumb screw clockwise all the
way down to hold the sling swivel in place.
If the receiver is missing the grommet
assembly, install the sling like this:
1.±
Place the stud (1) into the thick spacer (2).
2.±
Place replacement grommet (3), lip end first,
into the inside of the receiver where the
missing grommet would normally be found.
3.±
Place and hold the lug (4), lip end first, in
the inside of the receiver and into the spacer
(2). The spacer can be on either the inside or
outside of the receiver.
4.±
Add one drop of blue Locktite
®
246 to the
threads of the stud (1). Screw the stud with
spacer (2) into the lug (4) and snug down
the stud.
T
he snap hooks on the M249
machine gun’s sling tend to
wear and even crack the upper
receiver hole where they attach
to the receiver. If the receiver
hole is cracked, the receiver
has to be coded out. Good
news! The new sling swivel
adapter will stop that wear.
Order
the
front
sling
mounting kit with NSN 1005-
01-529-8406,
the
rear
sling
mounting kit with NSN 1005-
01-529-8408, and the quick-
release swivel with NSN 1005-
01-529-9309. You’ll need two
swivels for each M249.
M249
Machine
Gun…
Better
Swivel
Protects
Receiver
you’ve
got
to
do something
about this
sling swivel.
I’ve got
just the
fix…
…the
new
sling swivel
adapter!
I
can’t
take
it anymore!
it’s
rubbing
me
raw!
Grommet
3
4
1
2
Buttplate eyelet
Sling swivel
8
6
7
Thumb
screw
Sling
swivel
post
Pivot
plate
725 36-37.indd
1-2
2/22/13
3:58 PM
Click here for a copy of this article to save or email.


Back to Top
Back to Top