HALDEX-L31125
HALDEX PURE AIR PLUS L31125 4/96; EXTENDED PURGE KIT (DQ6027); HEAVY DUTY CANISTER KIT (DQ6028)
INSTALLATION INSTRUCTIONS
APRIL 1996
HALDEX-L31125 - Page 2 of 7
'
EXTENDED PURGE/HEAVY DUTY CANISTER KIT
INSTALL ATION INSTRUCTIONS
a W±rning
When working on air system components the folLowIng
precautions should be observed.
1± STop the engIne when working under a vehicLe. ALways
bLock the vehicLe wheeLs to prevent a fore or aft roLL±
BLeeding
off system pressure may cause the vehicLe to roLl. Keep hands
away from brake chamber push rods and brake adjusters; they
may appLy as sys²em pressure drops³
2´ Never connect or disconnect a hose or Line contaIning air
pressure³
µt may whip as air escapes³
Never remove a
component or a p¶pe pLug unLess you are certain aLL system
air pressure has been exhausted±
3. Never exceed recommended working air pressure and
aLways wear safety gLasses when working wIth pressurized
aIr. Never Look directLy into component por·s or direct a
pressuriZed air flow a² anyone.
4³ Never attempt to disassembLe a component untiL you have
read and understood aLL recommended procedures. Some
components contain powerfuL springs and inJury can resuLt if
not properLy disassembLed. Use only proper tools and obseRe
aL¸ precautIons pertainIng to the use of those tooLs±
exte²ded pu³´e kµt (dQ6027) co²te²ts
QTY.
DESCRIPTION
PART NUMBER
2
¹ube
&
Fitting AssembLy
5300706
1
DraIn VaLve (1/4")
º0713
1
Pipe »Lug (3/8¼½
7-X¾1002
1
Air ¿eseRoir (À50inÁ)
N-3625-G
Back to Top
