MWO-9-2320-272-35-1
MODIFICATION OF 5-TON M939, M939A1, M939A2 SERIES FAMILY OF VEHICLES (FOV)
M939 BRAKE STABILIZATION PROGRAM (RETROFIT OF ANTI-LOCK BRAKE SYSTEM (ABS) FOR M939 FOV); MODIFICATION WORK ORDER
JANUARY 2007
CHANGE 1
MWO-9-2320-272-35-1 - Page 34 of 109
MWO 9-2320-272-35-1
32
INSTRUCTIONS FOR COMPLETING THE QA CHECKLIST (FORM TRK 1204)
Section I. VEHICLE INFORMATION
1.
ABS WORK ORDER NUMBER
– Reserved for an internal work order number to be assigned.
2.
DATE
– This will be the date the vehicle is in-processed and accepted for the ABS MWO application.
This date will not correspond to the ABS Work Order Number, Julian Date if the initial truck data
entered into RAILS on a date other than when the vehicle is accepted for the ABS MWO application.
3.
SERIAL NUMBER
– Annotate the serial number as indicated on the vehicle data plate located on the
curbside dash. For the M939/A1 vehicles, the serial number is also stamped on the roadside front frame
rail. All serial numbers will be checked for proper format. The original serial number prefix formats as
provided by the original equipment manufacturer (OEM) are provided in table A. Where the serial
number prefix does not match the OEM list, the serial number will be verified by a second individual ie
Site Chief, Lead
Mechanic, or QA Inspector. The verbiage “Serial Number Verified” will be written in
the “Preinspection Notes Block”. If the serial number can still not be verified, contact Premier
Professional System (PPS) at 800.953.7679.
4.
REGISTRATION/USA NUMBER
– Annotate the vehicle registration number as indicated on the
vehicle data plate located on the curbside dash. (NOTE: Do not refer to any painted registration
numbers as they could be incorrect.)
5.
MILEAGE
– Annotate the vehicle mileage as indicated on the vehicles odometer.
6.
MODEL AND NOMENCLATURE
– Annotate the model and nomenclature of the vehicle as indicated
on the vehicle data plate located on the curbside dash.
7.
ADMINISTRATIVE NUMBER
– Annotate the administrative number assigned to the vehicle.
8.
UNIT IDENTIFICATION CODE (UIC)
– Annotate the depot, post, camp, or station UIC.
9.
NATIONAL STOCK NUMBER (NSN)
– Annotate the NSN of the specific vehicle model as indicated
on the vehicle data plate located on the curbside dash.
10. UNIT/ORGANIZATION
– Annotate the unit designation in this block.
11. DEPARTMENT OF DEFENSE ACTIVITY ADDRESS CODE (DODDAAC)
– Annotate then unit’s
DODAAC.
Section II. PREVIOUS MWO’S APPLIED
Annotate previously authorized MWO’s have been applied to the vehicle by placing a check or “X” in the
appropriate block. If the MWO has been applied but the metal tag is not affixed to the vehicle, annotate
this in the Pre-Inspection Notes Block.
Section III. PREINSPECTION NOTES
Annotate any deficiencies found during the preinspection.
Section IV. CTIS OPERATIONAL STATUS (A2 MODELS ONLY)
Annotate the status of the CTIS by checking the appropriate block. Should the CTIS be nonoperational,
annotate those deficiencies in the CTIS notes block.
Back to Top
