MWO-9-2320-280-20-6

MODIFICATION WORK ORDER

MODIFICATION OF 1-1/4 TON VEHICLES; HEAVY VARIANT, ARMAMENT CARRIER, AND EXPANDED CAPACITY VEHICLES M1097, M1097A1, M1025A2, M1097A2, M1113 AND M1114; AIRLIFT BUMPER REINFORCEMENT

JANUARY 2001
MWO-9-2320-280-20-6

  MWO-9-2320-280-20-6 - Page 6 of 18

6. USA Registration Number
7. Date of Application
8. Hours required for Application.
9. Software Version
(3)
For off-line reporting, the 3.5-inch disk shall be mailed to the following address:
Commander
TACOM-Warren
ATTN: AMSTA-LC-CIPWM
Warren, MI 48397-5000
b.
Marking Equipment.
(1)
After Airlift Bumper Reinforcement Modification Kit is installed, mark MWO under “9-2320-280-
20-6” in the MWO Applied block and date applied in Date block on 10930014 MWO instruction
plate.
NOTE
NOTE
• Do not remove any existing MWO instruction plates
affixed to the reinforcement panel.
• Perform steps 2 and 3 for M1097, M1097A1, M1025A2,
M1097A2, M1113, and step 4 for M1114.
(2)
Install MWO instruction plate 10930014 by drilling a 0.104-inch diameter hole (#37 drill bit)
within designated area on left side body reinforcement panel and secure with MS21318-20 drive
screw as shown in figure 7.
(3)
After drive screw is installed, flatten or remove protruding excess drive screw material from
inside of side body reinforcement panel.
(4)
Apply versilok adhesive 204 on back of MWO instruction plate 10930014 and install on left side
body armor panel as shown in figure 8.
15. MATERIAL CHANGE (MC) NUMBER.
This MWO is authorized by (MC) number 1-00-06-0009.
16. MODIFICATION IDENTIFICATION.
a.
When installed correctly, the Airlift Bumper Reinforcement Modification Kit will appear as shown
in figure 9.
b.
After the Airlift Bumper Reinforcement Modification Kit is installed, the airlift bumper reinforcement
should be inspected for secure mounting. Any faults detected, or discrepancies noted, will be corrected before
the vehicle is returned to normal service.
c.
After the vehicle is modified it will be “AUTHORIZED TO TOW TRAILERS WITH MAX GROSS
WEIGHT OF 4,200 LB (1,907 KG)”.
MWO 9-2320-280-20-6
6


Back to Top