MWO-9-2320-387-20-1
MODIFICATION WORK ORDER
MODIFICATION OF 1-1/4 TON VEHICLE EXPANDED CAPACITY VEHICLE; M1113 AND M1114; REAR DIFFERENTIAL COOLER MODIFICATION KIT
SEPTEMBER 2002
MWO-9-2320-387-20-1 - Page 4 of 44
MWO 9-2320-387-20-1
4
c.
Bulk and Expendable Material:
NSN
NOMENCLATURE
CAGEC
PART NO.
QTY
Drycleaning Solvent
81348
P-D-680
A/R
Silicone Compound
11862
1052734
A/R
Sealing Compound, Pipe
05972
59231
A/R
Adhesive: Type II, Class I
58536
A-A-3097 TY2 CL 1
A/R
Lubricating Oil
81349
MIL-L-2105
A/R
Hydraulic Fluid
24617
Dexron® III
A/R
d.
Parts Disposition. All parts removed and not used during installation will be returned to stock for
disposition in accordance with AR 725-50.
9.
SPECIAL TOOLS; TOOL KITS; JIGS; TEST, MEASUREMENT AND DIAGNOSTIC EQUIPMENT (TMDE); AND
FIXTURES REQUIRED.
a. Hand tools necessary to apply MWO are contained in this tool kit:
NOMENCLATURE
NSN
CAGEC
SUPPLY CATALOG
Tool Kit, General Mechanic’s
50980
SC 5180-95-N26
b. Tools necessary to apply MWO is in this shop set:
NOMENCLATURE
NSN
CAGEC
SUPPLY CATALOG
Shop Equipment, Automotive 4190-00-754-0654
19204
SC 4910-95-A74
Maintenance and Repair:
Organizational Maintenance
Common #1
10. MODIFICATION PROCEDURES.
a.
Vehicle Preparation.
(1)
Park vehicle and apply parking brake lever. (Refer to TM 9-2320-387-10.)
(2)
Disconnect battery ground cables. (Refer to TM 9-2320-387-24.)
(3)
Remove rear brake protection guards. (Refer to TM 9-2320-387-24.)
(4)
Remove rear propeller shaft. (Refer to TM 9-2320-387-24.)
NOTE
NOTE
Have drainage container ready to catch oil.
(5)
Remove drain plug and drain rear differential oil. (Refer to TM 9-2320-387-24.)
.
WARNING
WARNING
.
Hood must be supported during hood prop and bracket removal.
Failure to support hood may cause injury to personnel or damage to
equipment.
Back to Top
