MWO-9-2330-390-25-1
MODIFICATION WORK ORDER
MODIFICATION OF M1022A1 DOLLY SET; POSITIONING TUBE REINFORCEMENT
DECEMBER 2006
CHANGE 1
MWO-9-2330-390-25-1 - Page 41 of 54
MWO 9-2330-390-25-1
C-9
APPENDIX C:
TOP AND BOTTOM BEAM AND HYDRAULIC LIFT
CYLINDER REMOVAL / INSTALLATION (Con’t).
NOTE
•
Preformed packings should be lightly coated with hydraulic fluid before
installation.
23. Install two new preformed packings (4) and straight connectors (5) on positioning
cylinders (2) inside bottom beam (19 – Rear, 20 Front).
24. Connect two hose assemblies (6) to straight connectors (5) at positioning cylinders (2).
Back to Top
