MWO-9-2350-314-20-10
MODIFICATION OF HOWITZER, MEDIUM, SELF-PROPELLED: 155MM, M109A6
MODIFICATION WORK ORDER
SEPTEMBER 1998
MWO-9-2350-314-20-10 - Page 1 of 13
MWO 9-2350-314-20-10
ROUTINE
The MWO effective date is 1 December 1997 and the completion date is 30 November 2001.
MODIFICATION WORK ORDER
MODIFICATION OF HOWITZER, MEDIUM,
SELF-PROPELLED: 155MM, M109A6
(NSN 2350-01-305-0028) (EIC: 3FC)
Headquarters, Department of the Army, Washington, D.C.
1 SEPTEMBER 1998
REPORTING OF ERRORS AND RECOMMENDING IMPROVEMENTS You can help improve
this MWO.
If you find any mistakes or if you know of a way to improve these procedures, please let us know.
Mail your
letter or DA Form 2028, Recommended Changes to Publications and Blank Forms, direct to Director, Armament and
Chemical Acquisition and Logistics Activity, ATTN:
AMSTA-AC-NMLI, Rock Island, IL 61299-7630.
A reply will be
provided to you.
DISTRIBUTION STATEMENT A.
This publication is approved for public release; distribution is unlimited.
1.
PURPOSE.
This MWO prescribes procedures for installing a segment board cleaning mechanism.
The segment
board cleaning mechanism is a permanently installed assembly that makes cleaning the segment board easier.
2.
PRIORITY.
This modification is classified ROUTINE.
3.
END ITEM(S) OR SYSTEM(S) TO BE MODIFIED.
See Table 1.
Table 1.
End Item or System to be Modified.
NOMENCLATURE
NSN
PART NO.
MODEL
CAGEC
SERIAL NO
RANGE
Howitzer, Medium,
Self-Propelled: 155 MM
12553195
M109A6
19200
1-645
4.
MODULE(S) (COMPONENTS, ASSEMBLIES, SUBASSEMBLIES, BOARDS, AND CARD(S) TO BE MODIFIED).
Not applicable.
5.
PARTS TO BE MODIFIED.
The parts listed in Table 2, whether installed or in depot stock, shall be modified.
Stocked parts shall be modified prior to issue and shall be marked so that it can be easily determined that modification has
been accomplished.
The electrical shield part number and NSN change when the electrical shield is modified.
1
Back to Top
