MWO-9-2350-314-20-10
MODIFICATION OF HOWITZER, MEDIUM, SELF-PROPELLED: 155MM, M109A6
MODIFICATION WORK ORDER
SEPTEMBER 1998
MWO-9-2350-314-20-10 - Page 6 of 13
MWO 9-2350-314-20-10
NOTE
When installing lifting assembly (32) on modified electrical shield (33), make sure
stop pin (34) is near the bottom of the lifting assembly.
(1)
Fasten lifting assembly (32) to modified electrical shield (33) with four screws (35) and four flat washers
(36).
The modified electrical shield has a rectangular cutout and four extra screw holes to accommodate the lifting
assembly.
(2)
Rotate the handle on lifting assembly (32) clockwise so it contacts stop pin (34).
(3)
Insert cleaning block assembly (37) into lifting assembly (32).
(4)
Release the handle on lifting assembly (32).
It should rotate counterclockwise; back to its original position.
d.
Installation of the Electrical Shield.
6
Back to Top
